![]() ![]() Many of you are asking what is the difference between the free Silhouette Studio and Designer Edition, etc. This will make the cut line appear.(Last updated 7/16/17 though v4.1 open beta and now includes downloadable Comprehensive Silhouette Studio Features List in PDF format) If for any reason the cut line is not highlighted, go to the action icon in the cut settings and select cut. When you finish tracing the image ensure you finish at the start point.ġ5- When you click at the final point, the rest of the image will disappear and only the traced area will be on the design space.ġ6- When you go to cut, you will see that the image also has a cut line around it. A green line will appear around where you are tracing.(2)ġ4- As you can see the green line where you click will highlight the trace area. Click on the part of the image where you would like to traces and continue clicking around the part of the image you want. This will bring up a a small circle with a dot in the middle. Then select the trace icon.ġ2- Select the magnet trace tool from the trace window.ġ3- Once the magnet tool is selected a magnet trace box will appear (1). This gives you the ability to trace a specific part from a photo or image. You can then fill each traced part with the colours required by using the fill tool or even the eyedropper so the colours match.ġ0- As you can see when you go to cut each colour is now a cut file.ġ1- Lastly there is a magnet trace tool. Once you are happy select trace(3).ĩ- As you can see only the red colour traced.ġ0- Repeat the process with the other colours. ![]() You can adjust it by changing the threshold to only highlighting the colour you want to trace. If there are similar colours/hues they may all highlight. All of that specific colour will highlight yellow. This time select the trace by colour option.Ĩ- Click on the trace by colour eyedropper (1). This is a new function in the V4 software, and is available in the designer edition. Once you are happy with the trace line select trace (3).Ħ- As you can see the trace line is the same as previous option and ready to cut.ħ- The next option is the trace by colour. Rather than the whole image getting highlighted you will see that only where the trace line will go is highlighted yellow. Select your trace area (1), then this time select outline(2). Once you are happy click trace (3).Ĥ- You imaged is traced and a cut line is where you traced.ĥ- You have a second option in the basic trace function now. (In V3 you had to manually turn off this function) Adjust your threshold to ensure all the area you want to trace is highlighted. It is also good to note that in the new software the high pass filter is automatically off. You will see that the area will highlight yellow. Ensure the solid fill option is selected (2). You will see 3 different trace options.ģ- Firstly select your trace area (1). Select the trace icon on the right toolbar. To use the trace by colour and magnet trace you will require the designer edition.Ģ- Open the image you would like to trace. I will be using the designer software in this tutorials. regular trace, Trace by colour and magnet trace. In the Silhouette V4 software there are now 3 trace functions. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |